Eaton Electrical 34003991EN/EB - Manual (Page 15)

Network Management Card – User Manual 34003991EN/EB Page 15/118
Ethernet port
LED Colour Activity Description
ACT Green
◗ Off ◗ Card not connected to the network.
◗ On
◗ Card connected to the network but
without activity
◗ Flashing
◗ Port is active in receiving /
transmission
100M Orange
◗ Off ◗ Port operating at 10Mbits/s.
◗ On ◗ Port operating at 100Mbits/s.
Service port
LED Colour Activity Description
UPS Green
◗ Off ◗ Card startup in progress.
Data
◗ On
◗ Communication with UPS in
progress
◗ Flashing
◗ Normal operation.
Communication with the UPS is
operational
RS232 Orange
◗ Off ◗ Configuration menu is active
◗ On ◗ Normal operation. Configuration
menu is deactived
◗ Flashing ◗ Communication with the
Environment Sensor (option).
2.3 Installation in the UPS
The Network Management Card (66102) can be "hot" installed in all UPSs of the MGE Office Protection Systems or
Powerware range equipped with a Minislot without having to shut it down.
◗ Remove the protective plastic cover from the Minislot
◗ Note the card's MAC address prior to insertion
◗ Insert and tighten the card's retaining screws
◗ Connect the ETHERNET cable
◗ Wait 2 min. the card is completely operational when the green UPS Data LED flashes continuously