Eaton Electrical 34003991EN/EB - Manual (Page 37)

Network Management Card – User Manual 34003991EN/EB Page 37/118
4.2.4 UPS weekly schedule programming
Click on the "Weekly schedule" section of the menu.
UPS configuration may prevent the shutdown and restart commands from being properly run. Read the UPS user
manual for more information.
The weekly schedule enables the administrator to optimise power consumption or program a reboot of the protected
equipment at a set time.
In a shutdown sequence, the Network Shutdown Modules connected to the card are informed and ensure that each
machine is shut down correctly before the UPS output is switched off. Up to 7 UPS shutdown sequences can be
programmed in one week, with a minimum shutdown delay of 30 minutes.
The On / Off sequences are valid only if the card's time has been properly set.
Security: The administrator clicks on "Save" and enters his/her login / password to save any edits. The login and
password by default are: admin/admin