Epson Perfection 610 - Manual (Page 26)

EPSON Perfection 610 Revision B
Assembly and Disassembly Overview 26
4.1 Overview
This chapter describes procedures for disassembling the EPSON
Perfection 610. Unless otherwise specified, the scanner can be
disassembled by reversing the disassembly procedures.
4.1.1 Precautions
The directions used in this chapter are defined as shown in Figure 4-1.
Figure 4-1. Directions
4.1.2 Tools
Use the tools specified in Table 1-1.
4.1.3 Screws
The screws used in the scanner are as shown in Table 4-2. Make sure
you always use the correct type and number of screws for the
assembling part. See Table 4-3 for the screw appearances.
Table 4-3. Screw Appearances
W A R N I N G Disconnect the power cable before disassembling or
assembling the scanner.
C A U T I O N
When servicing, note the points below:


Consider the size of the scanner and make enough
room for servicing.

Since this scanner is a precision equipement,
service it on a flat, level, heavy-duty table.
R e a r ( B a c k )
F r o n t
R i g h t L e f t
E P S O N
I n s i d e
Table 4-1. Tools
Names Availability Part Number
Phillips screw driver (#2)
B743800200
Standard screw driver
B743000100
Pliers
B740400100
Tweezers
B641000100
Table 4-2. Screw Specifications
Abbreviation Description
CP Cross-recessed Pan Head screw
CBS Cross-recessed Binding Head S-tite screw
CCP Cross-recessed Cup Head P-tite screw
Head appearance
Type Washer
Top Side
Cross-
recessed Binding
Pan
Cup
Standard
- - - -
S-tite
B-tite
P-tite
With Outside Toothed
lock washer
With Spring lock
washer