Epson Perfection 610 - Manual (Page 35)

EPSON Perfection 610 Revision B
Assembly and Disassembly Disassembly Procedures 35
10. Inserting a standard screw driver from the back, remove the FFC
metal clamp.
Figure 4-19. FFC Metal Clamp and FFC Removal
11. Release the FFC (white) from the connector and the two guide tabs
in the Carriage Unit, and then remove the Carriage Unit.
Figure 4-20. Carriage Unit
Carriage Unit
FFC Metal Clamp
Connector
Guide Tabs
FFC Cable
Carriage Unit