Epson Perfection 610 User Manual
Page 34
Advertising
EPSON Perfection 610
Revision B
Assembly and Disassembly
Disassembly Procedures
34
7. Release the timing belt from the driven pulley.
8. Remove the driven pulley assembly by pushing it in the direction
indicated with the arrow. (See Figure 4-17.)
9. Remove the CR shaft from the Carriage Unit.
7.
Figure 4-16. Timing Belt Removal
Figure 4-17. Driven Pulley Assembly Removal (3)
Figure 4-18. Carriage Guide Shaft Removal
Driven Pulley
Timing Belt
CR Shaft
Carriage Unit
Advertising