Epson L-500V - Manual (Page 53)

53
Using the battery charger
WARNING:
Read all relevant safety and operating instructions before using the
battery charger, as misuse could result in personal injury from fire,
explosion, leakage, overheating, or electric shock.
◗ Use only Epson battery charger model 2090821-00 provided to
charge Epson Lithium ion battery model B32B818242. Never
attempt to charge other types of batteries in this charger as they
may explode, leak, overheat, or cause personal injury.
◗ Beware of electrical shock hazards.
◗ Do not use the battery charger near water or handle it with wet
hands.
◗ Keep the charger away from heat sources. Do not use the charger
outside the temperature range of 32 °F to 104 °F (0 °C to 40 °C).
◗ Do not insert objects into any openings on the charger as they
may touch dangerous voltage points or short out parts.
◗ Never disassemble or modify the charger.
◗ Use the charger indoors only, in a dry location. Do not expose the
charger to water or excess humidity.
◗ Use only the type of power source indicated on the label and
always supply power directly from a standard domestic electrical
outlet. Do not place multiple loads on the electrical outlet.
◗ Be sure your AC power cord meets the relevant local safety
standards.
◗ Never insert or disconnect the power plug with wet hands.
◗ Power supply cords should be protected from abrasion, cuts,
crimping and kinking. Be sure to place the cord to avoid any
damage. Do not place objects on top of the power cord or allow
the power cord to be stepped on or run over. You should take
special care to try to keep the power cord straight at the ends and
at the points where it enters and leaves the transformer.
◗ Do not allow the AC power cord to become damaged or frayed.