Escali Cibo - Manual (Page 4)

How to clear “Tare” Feature:
Remove all items from the tray. A negative weight will appear on the display. Press
the “Tare” key again to reset the scale to “0g / 0 oz”
How to select the Weigh Mode:
After the scale is turned ON, your scale will show WT 0.0 oz (ounces). You
may switch to the other weighing units during use by pushing the
“g / oz / WT’ key.
How to display Nutritional data:
1) Make sure your scale is in WT mode (press “g / oz / WT” key if necessary),
”WT” will display
2) Place the food item slowly on the tray
3) Find the 3 digit food code from the list of 999 codes in this manual
4) Use the number keypad to input the food code. The code number is shown on
the bottom left hand corner of the display. (You can clear your input with the
CLR/MC key)
5) Press CAL, SOD, PROT, FAT, CARB, CHOL or FIBR key to display the
nutritional readings
CAL Key for indication of calories
SOD Key for indication of Sodium in milligrams
PROT Key for indication of Protein in grams
FAT Key for indication of Fat in grams
CARB Key for indication of Carbohydrates in grams
CHOL Key for indication of Cholesterol in milligrams
FIBR Key for indication of Fiber in grams
How to save Nutritional data:
This feature cumulates the dietary values of the foods being weighed in the diet memory.
1) Follow step 1 – 5 of ”How to display Nutritional data”
2) Press g / oz / WT key to return to weigh mode
3) Press the M+ key to save the nutritional data
4) The display will show M01 to indicate the first saved nutritional data
5) The saved data will remain in the memory until cleared (even after turning
off the scale)
6) Up to 98 additional nutritional readings can be added to the memory