Escali Cibo - Manual (Page 5)

How to recall saved Nutritional data:
1) Make sure your scale is in WT mode (press “g / oz / WT” key if necessary),
”WT” will display
2) Press the MR key. The display will show “
∑
” before the total memory number,
and the total calories of all food items saved to the memory
3) Press nutrition keys to display the total of the other nutritional values saved
to the memory
4) The total weight of the food items saved to the memory can not be displayed
How to clear saved data:
1) Make sure your scale is in WT mode (press “g / oz / WT” key if necessary),
“WT” will display
2) Press and hold the CLR/MC key for 2 seconds to clear the memory
Do not place overweight items on scale
Weighing items over the maximum weight capacity will cause an “Error” to display.
Immediately remove overweight items to avoid causing damage to your scale.
Battery Replacement/Installation
This unit comes with a low battery indicator. Please replace when the low battery
symbol appears.
1) Remove the battery door
2) Install the 9-volt battery connections
3) Replace the battery door
Additional Information
1) Make sure your scale is at room temperature and on a stable horizontal surface
free of vibration.
2) This scale is not waterproof. Do not expose to moisture.
3) As this scale is a precision instrument, it must be handled with extreme care.
Avoid rough treatment, shaking and vibration.
4) Do not disassemble this scale or the warranty will be void.
5) The display value may be affected by electromagnetic disturbances such as
operating near a radio. If this occurs, move the device that is causing the
disturbance and turn the scale off and restart.