Florabest FLV 1200 A1 - Manual (Page 55)

55
GB
Cleaning,
maintenance, storage
Work that has not been de-
scribed in these Instructions
must be carried out by a ser-
vicing agency authorised by
us. Only use original parts.
Wear gloves when handling the cyl-
inder.
Prior to all maintenance and clean-
ing work always switch off the
implement, disconnect the plug from
the power socket and wait until the
cylinder is standing still.
General cleaning and mainte-
nance work
Do not jet water onto the
implement and do not clean
it under flowing water. This
would result in the danger of
an electric shock and the im-
plement could be damaged.
• When work has finished remove plant
residues adhering to the wheels, inside
the ventilation opening, the grass ejec-
tor opening and the cylinder. Do not
use hard or pointed objects for this
purpose as they could damage the im-
plement.
• Completely empty the collection bag.
• Always keep the implement clean. Do
not use cleaning agents or solvents.
We cannot be held liable for damage caused
by our implements if they were improperly
repaired, if non-original parts have been used
or if they were used not in keeping with their
intended purpose.
Storage
• Store the implement in a dry place well
out of reach of children.
• Allow the motor to cool down before
placing the implement in a closed
room.
• Do not wrap nylon sacks around the
implement as this could result in the for-
mation of moisture.
G
Loosen the wing nuts so that the bar
can be folded up for space-saving
storage.
Ensure that the cables are not
squeezed.
Disposal and protection
of the environment
Dispose of the implement, accessories and
packaging in an environment-friendly man-
ner.
Electrically-powered appliances must
not be disposed of with the domestic
waste.
Hand in the spent implement to a recycling
centre. The plastic and metal parts can
then be sorted out and graded for recy-
cling. Our Service Center will be happy to
answer any questions in this respect.
Spare parts
Refer to the specified Service Address, Fax
No. to purchase spare parts. Orders must
specify the Order number.
Verticuttor cylinder Order No. 91102646
Aerator cylinder .... Order No. 91102647
Collection bag ..... Order No. 91102651
When ordering spare parts list the position
number indicated in the exploded view.