Florabest FBC 7 B2 - Manual (Page 61)

GB
MT
54 FBC 7 B2
Installation location requirements
For the safe and trouble-free operation of the appliance, the following requirements must be met at the
installation location:
■ The temperature of the water fl owing through it may not exceed 40°C.
■ Use only clean fresh water.
■ Connect the appliance vertically, with the hose connection at the bottom.
■ Minimum operating temperature +5°C.
Connecting the appliance
CAUTION
The irrigation computer may only be connected to a drinking water outlet with a protective appliance
that complies with at least type HD according to EN 1717 (backfl ow preventer with pipe ventilation).
► Suitable adapters are available from specialist shops.
NOTE
► The appliance is equipped with a union nut for water taps with a 33.3 mm thread (G 1").
The adapter 12 is used to connect the appliance to water taps with 26.5 mm thread (G ³⁄₄").
If leaks/leakages occur when using the adapter 12 , wrap some Tefl on sealant tape around the
thread of the water tap.
♦ Insert the sieve 11 into the union nut as shown on the fold-out page.
♦ For 26.5 mm threads (G ³⁄₄"): Screw the adapter 12 to the water tap.
♦ Screw the union nut onto the thread of the water tap or the adapter.
♦ Screw the connecting piece 13 onto the hose connection 9 . A hose can then be connected to the
connecting piece.
♦ Open the water tap.
IB_103257_FBC7B2_LB5.indb 54 11.12.14 16:34