Florabest FSG 85 B1 - Manual (Page 49)

49
GB MT
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a final inspection. The functionality of
your equipment is therefore guaranteed. It
cannot be ruled out that residual quantities
of water or lubricants will remain on or in
the equipment/hose lines in isolated cases.
This is not a fault or defect and it repre-
sents no cause for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specified.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.
Intended use
The chain sharpener is suitable for sharp-
ening the standard saw chain types.
The equipment is not designed for any oth-
er type of application (e.g. grinding with a
coolant liquid, grinding other work pieces
or materials such as asbestos, which are
hazardous to health).
The equipment is intended for use in the
field of DIY. It is not designed for commer-
cial use.
The equipment is designed for use by
adults. Young people under the age of 16
Content
Introduction ............................... 49
Intended use .............................. 49
General description .................... 50
Scope of delivery ........................... 50
Function description........................ 50
Summary ...................................... 50
Technical specifications ............... 51
Safety Instructions...................... 52
Safety instructions/symbols on the
equipment ..................................... 52
Symbols in the manual .................... 52
General safety instructions .............. 52
Further Safety Instructions ................ 54
Installation ................................. 55
Operation .................................. 55
Working with the equipment ............ 55
Switching on and off ...................... 56
Sharpening the saw chain ................ 56
Maintenance and cleaning ......... 58
Cleaning ....................................... 58
Changing the grinding disk ............. 58
Storage ...................................... 59
Waste disposal and environ-
mental protection ....................... 59
Replacement parts/accessories ... 59
Guarantee ................................. 60
Repair Service ............................ 61
Service-Center ............................ 61
Importer .................................... 61
Translation of the original
EC declaration of conformity ...... 78
Exploded Drawing ..................... 81