Florabest Z31967 - Manual (Page 10)

10
• Ensure that the fittings are firmly seated.
• Check the watering system for damages and tightness prior to each use.
• The watering system set must only be operated in conjunction with the pres-
sure reducer.
• Never operate the watering system unattended.
• The watering system is temperature-resistant from 0-40 °C. In order to avoid
damages caused by frost, should the water system not be operated at tem-
peratures below 0°C.
• Dismantle the watering system during the period of frost and store it in a frost-
proof location, out of reach of children and pets as this product includes small
swallowable parts.
• Empty all water-bearing parts thoroughly prior to storage.
• Turn off the water tap after each use.
•
The product is not suitable for
delivering drinking water.
Installation of watering system (See fig. B)
Cut the flexible plastic hose (3) in the required length and place a serial dripper
(8) at each irrigation point. Insert at the end of the plastic pipe an End dripper
(9). With the aid of the plastic pipe bracket with spike (10), you can secure the
flexible plastic pipe (3) over the irrigated soil.
You can extend, shorten or re-connect new installations of pipe sections with the
plastic pipe connectors (6). Various irrigation lines must be combined by using
the 3-way branching elements (7). Due to technical reasons must at least 10
serial dripper (8) or end dripper (9) always be connected. You can set the water
flow in the individual irrigation lines by using the water flow regulators (5). The
water flow cannot be stopped completely when using the water flow regulators
(5).
Installation of water supply (See fig. B)
Screw the tap connector (1) with pressure reducer and filter to a 26.5 mm (3/4 “)
- water tap with an external thread. The watering system set must only be oper-
ated in conjunction with the pressure reducer. Press the flexible plastic pipe (3)
first through the screw plug for plastic pipe (4) and then through the channel on
the underside of the tap connector (1) all the way to the stop.
The tap connector (1) can also be connected to an ordinary 13mm (1/2 “) plug-
in systems for garden hoses by using the screw adapter (2).
Operation (See fig. B)
Open up all water flow regulators (5). Then turn on the water tap and wait until
the water has spread into the irrigation lines. Adjust now the amount of water by
using the water flow regulators (5). The irrigation system can also be controlled
via an irrigation timer or computer. Make sure that you turn off the water tap
before changing the settings on the irrigation system.
Cleaning and care
Clean the product with a slightly damp, lint-free cloth.
Disposal
The packaging is made entirely of recyclable materials, which you
may dispose of at local recycling facilities.
Contact your local refuse disposal authority for more details of how to dispose of
your worn-out product.
104577 IT_PT.indd 10 08.01.15 10:19