Florabest FGS 3.6 A1 - Manual (Page 58)

58
GB
Function description
The cordless grass & shrub trimmer is a
combination unit with two interchangeable
cutting devices. These are coated with plas-
tic (Teflon non-stick coating) to prevent rust.
For use as a shrub trimmer, a double-sided
blade block is used as the cutting head.
The catching blades are round off at the
side to prevent accidents, and positioned
in an offset arrangement to reduce the
risk of injury. A cutting head with several
blades is provided for use as a grass trim-
mer. The safety key protects the devices
from being started unintentionally.
Please read the following descriptions for
the function of the various controlling parts
of the unit.
Technical data
Unit
Motor voltage ............................ 3.6 V
Rated speed .......................... 1000 min -1
Protection class ................................... III
Protection category.......................... IP20
Grass-trimming blade
Cutting width ............................73 mm
Blade width ..............................80 mm
Shrub-trimming blade
Cutting length ........................120 mm
Distance between teeth ....approx. 8 mm
Weight (incl. accessories) ..approx 0.85 kg
Sound pressure level
(L
pA
) .................. 57 dB(A), K
pA
=3 dB(A)
Sound power level (L
wA
)
guaranteed ...........................92 dB(A)
measured ....... 79.1 dB(A); K
wA
=3 dB(A)
Vibration (a
n
)
at handle .........1.39 m/s 2 , K=1.5 m/s 2
Battery (Li-Ion)
Nominal voltage ......... 3.6 V 1.3 Ah
Loading time .................. approx. 3-5 h
Charger ............................. DK-MGB-48
Voltage input ................... 230 V~, 50 Hz
Nominal consumption ...................... 8 W
Voltage output ...............................4.8 V
Recharging current ..................... 450 mA
Performance output.......................3.6 VA
Protection class ............................... II
Protection category...........................IPX0
The noise and vibration levels have been
calculated according to the norms stated
in the conformity statement. Technical and
optical alterations to serve progress may
be made without notice. All measurements,
instructions and other data given in this
manual are therefore given without guar-
antee of correctness. Legal claims made
on the basis of this manual are therefore
excluded.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.Safety
precautions aimed at protecting the
user should be based on estimated
exposure under actual usage condi-
tions (all parts of the operating cycle
are to be considered, including, for
example, times during which the
power tool is turned off and times
when the tool is turned on but is run-
ning idle).