Open source software notice information, External control device setup, Troubleshooting – LG OLED65G6P User Manual

Page 13: Specifications, English, Television system, Program coverage, External antenna impedance, Environment condition

Advertising
background image

13

ENGLISH

Open Source Software Notice

Information

To obtain the source code under GPL, LGPL, MPL,

and other open source licenses, that is contained in

this product, please visit

http://opensource.lge.com

.

In addition to the source code, all referred license

terms, warranty disclaimers and copyright notices

are available for download. LG Electronics will also

provide open source code to you on CD-ROM for

a charge covering the cost of performing such

distribution (such as the cost of media, shipping,

and handling) upon email request to

opensource@

lge.com

. This offer is valid for three (3) years from

the date on which you purchased the product.

External Control Device Setup

To obtain the external control device setup

information, please visit

www.lg.com

.

(Depending upon model)

Troubleshooting

• Cannot control the TV with the remote control.

- Check if anything such as tape has been placed

over the receiver.

- Check if there is any obstacle between the

product and the remote control.

- Replace the batteries with new ones.

• No image display and no sound is produced.

- Check if the product is turned on.

- Check if the power cord is connected to a wall

outlet.

- Check if there is a problem in the wall outlet by

connecting other products.

• The TV turns off suddenly.

- Check the power control settings. The power

supply may be interrupted.

- Check if the Sleep Timer / Timer Power Off

feature is activated in the TIMERS settings.

- If there is no signal while the TV is on, the TV

will turn off automatically after 15 minutes of

inactivity.

Specifications

Product specifications may be changed without

prior notice due to upgrade of product functions.
Estimated yearly energy consumption indicated on

the FTC label is measured in accordance with the

Test Procedures for Television Sets (USA only).
The actual energy consumption depends on the

usage environment (The content watched, TV

settings, etc.).

Television System

ATSC, NTSC-M, 64 & 256 QAM

Program Coverage

VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135,

CADTV 1-135

External Antenna Impedance

75 Ω

Environment Condition

• Operating Temperature

0 °C to 40 °C (32 °F to 104 °F)

• Operating Humidity

Less than 80 %

• Storage Temperature

- 20 °C to 60 °C (-4 °F to 140 °F)

• Storage Humidity

Less than 85 %

Advertising
This manual is related to the following products: