Elinca FX 100 User Manual

Page 3

background image


The quality of light and exceptional performance is the result of long research, application of

demanding principles, the long experience of ELINCHROM in lighting products for the studio

and the utilization of the latest technology in this area.

Totally integrated to the range of the ELINCHROM flashes, the Style 100FX - 400FX units

maintain the traditional look and function that is ELINCHROM.

The control provides continuously variable adjustment of the modelling lamp and the flash

power with precision over 5 f-stop, from full power 1/1 to 1/16 th.

Style 100FX - 400FX

The Elinchrom Style FX is manufactured by Elinca S.A. CH -1020 Renens/Switzerland

Dear Photographer,

Thank you for buying your Style FX compact flash unit.

All Elinchrom products are manufactured using the most advanced technology. Carefully selected

components are used to ensure the highest quality and the equipment is submitted to many controls

both during and after manufacture. We trust that it will give you many years of reliable service.

All Style FX flash units are manufactured for the studio and location use of professional

photographers. Only by observance of the information given, can you secure your warranty, prevent

possible damage and increase the life of this equipment.


This equipement has been tested and found to comply with the limits for a class B digital device, pursuant to Part

15 of the FCC Rules and meets all requirements of the Canadian Interference-Causing Equipement Regulations.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipement generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipement

does not cause harmful interferences to radio or television reception, which can be determined by turning the

equipement off and on, the user is encouraged to correct the interferences by one or more of the following


- Reorient or relocate the receiving antenna.

- Increase the separation between the equipement and receiver.

- Connect the equipement into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

ELINCA S.A. is not responsible for any radio or television interference caused by unauthorised modifications of

this equipement or the substitution or attachment of connecting cables and equipement other than those specified

by ELINCA S.A. The correction of interference caused by such unauthorised modification, substitution or

attachment will be the responsibility of the user.

FCC Class B Compliance Statement


This manual is related to the following products: