Elinca FX 100 - Manual (Page 9)

8
On/Off
proportional
14
Increase
15
15
Decrease
23035 23101 23033
Modelling lamps and fuse (230V Version)
Unit Modelling lamp Code Socket Fuse Code
Style 100FX 100W krypton 23002 E27 2.5AF 19033
Style 400FX 100W krypton 23002 E27 2.5AF 19033
Option: 150W halostar 23035 E27 2.5AF 19033
Option: 200W halogen 23034 GX 6,35 2.5AF 19033
The touch pad (14) controls the modelling lamp on/off and the proportional light.
Select the power with the touch pad (15). The modelling light output (100%) is achieved when
the power value is set to maximum.
Proportional modelling lamp, is set when the position "PROP" is selected (led is illuminated), the
light output is proportional to the selected flash power.
For all types of Style FX compact flash units, use maximum 200 - 250W modelling lamps
Note: lamp socket adapter E27 to GX 6.35, code 23101
This adaptator allows the use of the halogen lamp 200W, GX 6.35 (code 23034) in the Style 100 FX and
400 FX units.
If the modelling lamp does not illuminate, this may be due to the following:
1. The filament is broken after long use *(replace lamp and fuse)
2. The filament is broken after shock *(replace lamp and fuse)
3. An internal component failure, *(return the unit to customer service)
* Action required:
Modelling Light
230V Modelling lamp options: