Ericsson LBI-39169 - Manual (Page 27)

MONITORING EDACS FAULT CONDITIONS LBI-39169
27
Table 1 - Status Colors/Levels
Category Status
Condition
Status Meaning Icon Color
Administrative Unmanaged Users can set this value, which indicates that
the object should not be monitored and that the
status should be ignored. When the user sets
the object back to “managed.” the EDACS-
>Fault->Update operation must be performed.
Off-white
Administrative Testing An application sets the status to “testing” when
an object is undergoing temporary diagnostic
or maintenance procedures. This category is
not used by the EDACS Network Manager
application.
Salmon
Administrative Restricted An application sets the status to “restricted”
when a valid associated CEC/IMC/RCEC/SG
node license does not exist for this element. Tan
Administrative Shutdown An application sets the status to “shutdown”
when an object is inactive (although there may
not be anything necessarily wrong with the
object). This category is not used by the
EDACS Network Manager application. Dark Brown
Operational Unknown An application sets the status to “unknown”
when the status of an object cannot be
determined. EDACS icon may be blue if there
is another icon with the same Network Number
and Node Number or if polling does not detect
a physical device corresponding to this icon. Blue
Operational Normal An application sets the status to “normal” when
the object is in a normal operational state. Green
Operational Warning An application sets the status to “warning”
when an object may face a potential problem.
Cyan
Operational Minor/
Marginal
An application sets the status to
“minor/marginal” when an object has a minor
problem; this status should not, however,
impede the normal operation of the network. Yellow
Operational Major An application sets the status to “major” when
an object has serious problems; these
problems are likely to impede normal use of
the network. Orange
Operational Critical An application sets the status to “critical” when
a device is not functioning or is not accessible
by the EDACS Network Manager. Red