Ericsson LBI-39169 - Manual (Page 70)

LBI-39169 PROCEDURES
70
2. Select the enterprise of the agent reporting the traps, and the traps defined for the agent will be displayed in the
middle window. The severity level will be displayed in the middle window along with the trap name. The first
characters of an EDACS trap name conventionally are an acronym of the device against which the trap is placed.
3. Click on the Modify button and a window will popup.
4. Modify the text as required. NOTE: Modifications will be overwritten when the application is upgraded.
5. Select the OK button to exit this popup and click on the Apply button on the Event Configuration window for the
changes to take effect.
14.15 RESTORING DEFAULT EVENT DESCRIPTIONS
To restore the default event descriptions execute the following command:
> /usr/OV/bin/xnmevents -load /usr/EDACS/conf/C/ed_trapd.conf
14.16 MAPPING SEVERITY LEVEL TO ICON COLOR
1. Select Help->Display Legend from the OpenView main menu bar, this will provide a graphical display of the icons
and their associated colors.
14.17 CREATING A FULL SYSTEM IMAGE BACKUP
To create a full system image backup, perform the following steps:
1. As root user: Use console login.
> /etc/shutdown now <ENTER>
System will shutdown and come back up in single-user mode. If asked what terminal type, press <Enter>
2. Insert the tape into the tape drive (assume device name = /dev/rmt/ 0 · m).
> cd / <ENTER>
> tar -cvf /dev/rmt/0 ·m
..
<ENTER>
NOTE
One 90mm tape should handle the entire backup and the backup process will take approximately one hour to
complete.
When the backup is complete, carefully label all System Image backup tapes as “Sysddmmmyyyy Vol # (number of
this tape) of # (total number of tapes it took to complete the backup)”.
For example: Sys12DEC1994 Vol 1 of 4.
3. Enter the following command to reboot the workstation.
> /etc/shutdown -r now <ENTER>
NOTE