Ericsson LBI-39169 - Manual (Page 51)

MONITORING PERFORMANCE TRENDS LBI-39169
51
11.4 COMPARING PERFORMANCE FROM MULTIPLE SITES OR NODES
The Performance -> Compare menu item allows the user to chart a single MIB value for multiple nodes or sites.
The following graphs will display a single performance parameter for multiple nodes or sites on the same graph. There will
be a different line for each of the sites or nodes selected. The sites being displayed can be on different nodes.
•
Channel Assignments - Total Channel Assignments for all call types.
•
Queues - Total Queues for all call types.
•
Denies - Total Denies for all call types.
•
Drops - Total Drops for all call types.
•
System Busies - Total System Busies for all call types.
•
Emergencies - Total Emergencies.
•
Secondary Assignments - Total Secondary Assignments for all call types.
•
Message Trunks - Total Message Trunk Assignments for all call types.
•
Air Time - Total Air Time for all call types.
•
Queue Time - Total Queued Time for all call types.
NOTE: If selecting Airtime with one site selected (minimum number of icons is one for example), then graph
Airtime for that site only.
Channel Assignments
Queues
Denies
Drops
System Busies
Emergencies
Secondary Assignments
Message Trunks
Air Time
Queue Time
File...
Faults
Configuration
Accounting: File Transfer
Performance
Software Version
EDACS Help
Performance
Utilization
Accessibility
Compare
Monitor
Compare. Displays a single MIB value
for multiple nodes or sites.
Compare
MultiNode
MultiSite
Multinode or Multisite. Indicate
if this is for multinode or multisite.
Compare Criteria. Select the
compare criteria to be displayed.
Figure 29 - EDACS Performance -> Compare Menu