Ultimate Speed Z31071 - Manual (Page 6)

6 GB
Introduction / Safety notes
Hydraulic trolley jack
Introduction
These operating instructions form a
part of this product. Make yourself
familiar with all the operating instruc-
tions and safety advice for the product before
use. Use the product only as described and for
the indicated purpose. If you pass the product
on to anyone else, please ensure that you also
pass on all the documentation with it.
Proper use
The hydraulic vehicle jack is intended for raising
and lowering motor vehicles. Other uses or
modification of the hydraulic vehicle jack shall
be considered as improper use and may lead
to injury or damage. The manufacturer will not
accept liability for loss or damage arising from
improper use. The product is not intended for
commercial use.
Note: Reclose the release
5 valve after each
use!
Description of parts
1 Lifting handle
2 Lifting arm
3 Support plate
4 Carrying handle
5 Release valve
6 Lifting handle socket
7 Cover
8 Relief valve
9 Adapter
10 Hex bolt
11 Nut
Technical data
Stroke: 135–342 mm
150–357 mm (with adapter )
Maximum load: 2000 kg
Hydraulic oil
grade: SAE
10
Hydraulic oil
quantity: 115
ml
Maximum
force on lever:
350 N
Included items
1 hydraulic car jack
1 adapter
1 pump lever
1 operating instructions
Safety notes
DANGER! Follow the instructions below to
avoid the threat of loss of life, injury, or
damage to the product etc.
Always use axle stands and wheel chocks
in addition to your hydraulic vehicle jack.
Never work under a raised vehicle unless
you have taken additional safety precautions.
This is intended to prevent the vehicle from roll-
ing away, sliding off or overturning the jack.
Use the product on a solid, level surface
only. Using the product on an unstable or
uneven surface – such as a gravel surface –
may lead to the load slipping.
2000
kg
Ensure that you never exceed the
allowable (rated) load capacity.
The person operating the jack must observe
the jack and the load during all movements.
Never work under the raised load if it has
not been made secure by suitable means.
Do not allow the hydraulic vehicle jack to
be used by uninstructed or inexperienced
persons.