Ultimate Speed UKL 12 A1 - Manual (Page 31)

GB
MT
28 UKL 12 A1
♦ Open the 12 V vehicle air cleaner by carefully
unscrewing the fl uted screw insert anticlockwise
(using pliers if necessary) and removing it.
♦ Remove the plug tip from the fuse and take out the
fuse.
♦ Now insert a new fuse of type F1AL 250 V into
the 12 V vehicle connector, fi t the plug tip to the
slightly protruding end of the fuse and screw the
previously removed screw insert back in.
NOTE
If the device still does not work or the fuse blows
again immediately, the device is defective. In this
case, please contact the Service Hotline (see
chapter "Service").
IB_31369_UKL12A1_LB5.indb 28 IB_31369_UKL12A1_LB5.indb 28 03.04.14 08:11 03.04.14 08:11