Units of measure – Eagle Electronics IntelliMap 500C User Manual
Page 108
102
Main Menu with Transparency command selected.
To adjust Menu Transparency level:
Press
MENU
|
MENU
|
↓ to
T
RANSPARENCY
|
ENT
. The
T
RANSPARENCY
slider bar
appears. Press
↑ or ↓ to move the bar. The lower end of the scale makes
the menus opaque; the upper end is maximum transparency.
Units of Measure
This menu sets the speed and distance (statute or nautical miles, me-
ters), depth (feet, fathoms, or meters), temperature (degrees Fahrenheit
or Celsius), altitude (feet or meters) and heading (true or magnetic)
units. To change the units:
Press
MENU
|
MENU
|
↓ to
S
YSTEM
S
ETUP
|
ENT
|
ENT
.
Main Menu, System Setup submenu, left; Units of Measure Menu, right.
To set Unit of Measure: Use ↑ ↓ to select the desired category and
press
ENT
. Use
↑ ↓ to select the desired unit of measure and press
ENT
.
If you wish, you can now pick another category to change. After the op-
tion is set, press
EXIT
|
EXIT
|
EXIT
to return to the page display.