Epson EASYMP EMP-1705 - Manual (Page 20)

Using Multi-Screen Display 20
E
Drag the displayed monitor icon and place it where
desired.
Here, the actual monitor (1) is placed on the left, while the virtual
monitor (3) is placed on the right.
When the PC has multiple display output terminals, the numbers
assigned to the virtual terminals will be sequential to those of the
physical terminals.
When the monitor icon appears as follows, a virtual display is
connected.
F
Click the "OK" button. The "Display Properties"
screen closes.
Up to this point, the virtual display layout has been fixed.
Go to s
p.23 .
q
• When an external monitor is connected as a secondary
monitor, the image for that screen cannot be projected.
• Depending on the hardware, the number of the secondary
monitor may be other than "2". When the monitor icon is
displayed on the screen, click the icon and confirm that
the monitor type shown under "Display" is other than
"secondary".
3 1