Epson EASYMP EMP-1705 - Manual (Page 55)

55 Setting Image and Movie File Display Conditions and Operation Mode
You can set the display conditions and operation mode for playing
back image or movie files as a Slideshow in PC Free.
A
Tilt the [h] button on the remote control to position
the cursor on the folder where display conditions
are to be set.
B
Set each of the items.
Enable settings by positioning the cursor on the target item and
pressing the [Enter] button on the remote control.
Details of the items are given below.
C
Tilt the [h] button on the remote control up to
position the cursor on the "OK" button, and then
press the [Enter] button.
The settings are applied.
If you do not want to apply the settings, position the cursor on the
"Cancel" button and press the [Enter] button.
Procedure
Display order You can set the order of the files to be displayed.
You can select sorting of the files into either file
name order or revision date order.
Continuous
Play You can determine whether to repeat the Slideshow.
Screen
switching time You can set the time for a single file to be displayed
when running a Slideshow. You can set a time
between 0 and 60 s. When you set 0 sec (No
Transition), auto play is disabled.
Effect This sets the transition effects between files.