Error message when starting up emp slidemaker2, P.83 – Epson EASYMP EMP-1705 User Manual
Page 83
Troubleshooting
83
f
Error message when starting up EMP SlideMaker2
f
Mail is not sent even if an abnormality occurs in the projector
When the computer is started, is the connection to the
wireless LAN made manually?
Connect the Wireless LAN manually.
Check
Remedy
** .SIT is already registered.
(** Scenario file name)
Scenario files that have already been added to "Autorun Scenario List" cannot be added again. s
Because the folder hierarchy is deep, the scenario file
cannot be selected.
Because the hierarchy of the folder with the scenario file added to "Autorun Scenario List" is deep, it cannot
be selected. Change the destination for sending the target scenario file. s
Insufficient storage capacity on the disk.
Insufficient storage capacity in the drive to transfer scenario, cannot transfer the scenario. Make space in the
drive so that the scenario can be sent by deleting any unnecessary files.
** An invalid path is included.
(** the path name that includes the scenario file
name)
The path for the file to be opened was not found. Because of the following.
The scenario file was moved to another folder since it was last saved with EMP SlideMaker2.
The folder name containing the scenario file was changed since it was last saved with EMP SlideMaker2.
The scenario file you are trying to open was deleted.
Select File - Open and open the target scenario file, or search for it by using the Windows search function and
so on.
** The disk became full during accessing.
(** the path name that includes the scenario file
name)
Insufficient storage capacity in the drive containing the work folder, cannot save the scenario file. Make space
in the drive containing the work folder so that the scenario file can be saved by deleting any unnecessary files.
The specified document cannot be opened.
The PowerPoint file you are trying to add to the scenario is corrupted or cannot be used because it is
incorrect. Use another PowerPoint file.
Specify a different name or a different directory
A file with this name already exists. Change the scenario name and then save.
Check
Remedy
Is the wireless LAN unit connected?
Check that the wireless LAN unit is securely connected.
Is the network connect setting correct?
Check the projector’s network settings. s
User’s Guide "Network Menu (EMP-1715/1705 Only)"
Is "Standby Mode" set to "Network On"?
To use the mail notification function when the projector is in standby, set "Network On" in "Standby Mode"
from the configuration menu. s
User’s Guide "Extended Menu"
Did a fatal abnormality occur and the projector come
to a sudden stop?
When the projector comes to a sudden stop, mail cannot be sent.
If, after checking the projector, the abnormal state continues, contact your local dealer or the nearest address
provided in the World-Wide Warranty Terms. s
Inquiries
Check
Remedy
Quick Connection Mode