Epson EASYMP EMP-1705 - Manual (Page 8)

Using the main screen of EMP NS Connection 8
is displayed to indicate a search for a specified
projector or a profile-based search.
is displayed when a projector cannot be found as
a result of a search for an IP address.
Projector name The projector’s name is displayed.
IP address
(only for "Advanced
Connection Mode") The projector’s IP address is displayed.
SSID
(only for "Quick
Connection Mode") The projector’s SSID is displayed.
Display
(When "Use multi-
display" is checked) When "Use multi-display" is checked, select the
number of the display to use.s
p.23
Update information
(only for "Quick
Connection Mode") Updates the status of those projectors displayed in the
list.
Save profile Saves the results of a search for projectors on the
network as a profile. s
p.28
Clear list Deletes the currently displayed list of projectors.
Disable interrupt
connection Select this to prevent an interrupt connection by other
computers while a connection is established.
Use multi-display Select this when using the Multi-screen display
function. When this is selected, "Display layout" and
"Display properties" are displayed at the bottom of the
screen. Multi-screen display s
p.16
Set options You can set the environment, such as the processing
method, when EMP NS Connection is started. For
option settings, see s
p.34
Connect A projector can be clicked once you place a check
mark against it. Whenever connection with a projector
is possible, a toolbar is displayed.