Before initial use, First use remote control functions – Livarno XY-1500300-B User Manual
Page 10
Advertising
10 GB/IE
Before initial use
Remove the plastic strip from the battery compartment
7
of the
remote control
1
(Fig. B). This is only for transport safety.
Plug the low voltage plug
5
for the mains adapter
6
into the low
voltage jack
3
of the mood light
4
(Fig. A). Plug the mains
adapter into an easy to access outlet.
First use
Remote control functions
The remote control allows you to adjust the lighting effects of the mood
light
4
. The remote control
1
uses infrared light. This means the virtual
path between the remote control and the receiver on the mood light must
not be obstructed. The receiver for the transmission signal is located
behind the LED spotlight
2
(Fig. D). At full charge the remote control
has a range of about 5 metres.
Advertising