Livarno Z31228 - Manual (Page 7)

7 GB
LED Rope Light
Introduction
Before using the prod-
uct, please familiarise
yourself with all of the
safety information and instructions
for use. When passing this product
on to others, please also include
all the documents.
Intended use
This product is intended for use in
indoor environments and only for
private, domestic purposes. The
product can be used on all normally
flammable, smooth surfaces. The
product is not intended for com-
mercial use. The manufacturer is
not liable for damage caused by
improper use.
Parts description
1 Plastic clip
2 Connector
3 LED strip
4 Mains plug
5 Transformer
6 Double-sided adhesive tape
7 LED driver
8 Infrared receiver
9 Remote control unit
10 Screw
11 Upper metal clip
12 Lower metal clip
13 Eight-point plug
14 Battery
Technical Data
LED Strip:
Input voltage: 12 V
,
max. 20 W
Bulbs: 150 x LED (the
RGB-LEDs cannot
be replaced)
Protection
category:
Transformer:
Input voltage: 100–240 V∼
50 / 60 Hz,
max. 1.4 A
Output voltage: 12 V , 5.0 A
(5.45 mm low-
voltage plug)