Initial operation – Livarno LLFL 27 A1 User Manual
Page 19
GB
MT
16
LLFL 27 A1
Initial operation
Light bulb
♦
Screw the light bulb into a lamp with an E27 socket.
CAUTION
►
Please note that the heavier weight of the light bulb may
reduce the mechanical stability of certain lights and bulb socket,
and may adversely aff ect the contact and the bulb socket.
Remote control
NOTE
►
The supplied battery (CR2025) is already installed in the remote
control when delivered. Before use, remove the insulating strip
on the base of the remote control .
The battery must be replaced if the range of the remote control
decreases or the light bulb no longer reacts to the remote control .
♦
Pull the battery compartment out of the remote control by
fi rst pressing the lateral locking device and then pulling the battery
compartment out.
♦
Remove the depleted battery and insert a new battery of the type
CR2025 (button cell) into the battery compartment . Make sure
that the battery is inserted in accordance with its correct polarity.
♦
Slide the battery compartment back into the remote control .
IB_91291_LLFL27A1_LB5.indb 16
22.10.13 12:16