Livarno LLFL 27 A1 - Manual (Page 21)

GB
MT
18 LLFL 27 A1
FADE button = Switch between 7 colours with "soft" transition
SMOOTH button = Switch between 7 colours with "hard" transition
NOTE
You can set the speed of the colour changes by using the and
buttons. The medium speed is set when activating the colour
changes (speed level 5).
Press the button in order to increase the speed of the colour
changes.
Press the button in order to reduce the speed of the colour
changes.
NOTE
► If you turn the light bulb off and on again using the light
switch, the light bulb will always light up white. Preset light
colours or colour changes are not stored.
► If you turn the light bulb off and then on again using the
remote control , the light bulb will be illuminated in the light
colour or colour change most recently selected.
Cleaning
CAUTION
► Only clean the light bulb when it is switched off and cold.
♦ Clean the light bulb and the remote control with a soft dry
cloth.
IB_91291_LLFL27A1_LB5.indb 18 22.10.13 12:16