Livarno 54318 - Manual (Page 6)

6 GB
Safety instructions Introduction
Solar-powered LED light ball
Introduction
CONGRATULATIONS ON THE
PURCHASE OF YOUR NEW
LIGHT
You have selected a high quality product. The as-
sembly instructions are part of this product. They
contain important information on safety, handling
and disposal. Familiarise yourself with all the func-
tions of the appliance before operating it for the
first time. To do so, read the following assembly
and safety instructions. Use the product only as de-
scribed and for the indicated purpose. Keep these
instructions in a safe place. If you pass the product
on to anyone else, please ensure that you also
pass on all the documentation.
Intended use
The solar light is not suitable as residen-
tial room lighting.
The solar light is intended as an outdoor accent
light. Any other use or modification of the product
constitute improper use and pose a risk of short
circuits, fire, electric shocks and damage to the
product. The manufacturer is not liable for damage
caused by improper use. The product is not
intended for commercial use.
Parts description
1 Ground stake
2 Spacer tube approx. 7 cm
3 Spacer tube approx. 17 cm
4 Sphere
5 Solar module, consisting of:
a Cross-head
screws
b Housing
c Cross-head
screws
d Cover
e Solar cell
f Rechargeable AAA
battery
g On/Off switch
Scope of delivery
Immediately after unpacking check the parts are
complete and the product is in good condition.
1 x Ground stake 1
1 x Spacer tube approx. 7 cm 2
1 x Spacer tube approx. 17 cm 3
1 x Sphere 4
1 x Solar module incl. LED and rechargeable Ni-
Mh battery, AAA/ 1.2 V / 300 mAh 5
1 x Assembly instructions
Technical Data
Item number: 54318
Battery: 1x Ni-Mh rechargeable
battery/AAA / 1.2 V /
300 mAh
Light bulb: 1x LED (not replaceable)
Rated power: 0.2 W per LED
Protection type: IPX4 (splash-proof)
Solar cell: 50 mA, multicrystalline
Dimensions:
Solar light
(without ground stake): max. 34 x 15 cm (h x Ø)
Ground stake:
10 cm (h)
Distributor:
Edi Light GmbH, Heiligkreuz 22, A-6136 Pill