Livarno Z29538 - Manual (Page 4)

4 GB

Introduction
LED lamps
Q 
Introduction
The instructions for use are to be consid-
ered as part of the product. They contain
important information concerning
safety, use and disposal. Before using the product,
please familiarise yourself with all of the safety
information and instructions for use. The product
must only be used as described and for the stated
fields of application. If you pass the product on to
third parties, please give them all of the documenta-
tion as well.
Q  Intended Use
This LED lamp set is suitable exclusively for provid-
ing illumination in dry interior rooms in a private, do-
mestic environment. The light is intended for battery
operation only. Other uses or changes to the prod-
uct are considered to be contrary to the intended
use and may harbour risks of injury and damage.
The manufacturer does not accept any liability for
injury or damage resulting from use of this product
contrary to its intended use. The product is not
intended to be used for commercial purposes.
Q
Description of parts
1 LED lamp
2 Battery compartment
3 Battery compartment cover
4 Self-adhesive pad
5 Bulb
Q Technical data
Illuminant: 3 x LEDs, LED class 2 (the
LEDs cannot be replaced)
Batteries: 3 x 1.5 V , AAA Type
(not included)
CAUTION! RISK OF INJURY TO EYES! The
LEDs used comply with LED class 2. Never look into
the beam of the LED.
LED RADIATION
DO NOT STARE INTO THE BEAM!
LED CLASS 2
EN 60825–1: 1994+A2:2001+A1:2002
P < 0.32 mW
λ = 447 nm