Livarno 7594-010L - Manual (Page 6)

6 GB
Energy-Saving Table Lamp
Q Introduction
Please read carefully and completely
through these operating instructions. Fold
out the page with the illustrations. These
instructions form part of the product and contain
important information about bringing the product
into use and its handling. Always observe all the
safety advice. Check that the correct mains voltage
is available and that all the parts have been prop-
erly assembled before bringing into use. Should
you have any questions or be uncertain as to how
to operate the device, please get in touch with your
dealer or service point. Please keep these instruc-
tions in a safe place and hand them on to a third
party if necessary.
Q
Proper use
This light is designed only for use indoors, in dry
and enclosed rooms. Any use other than that de-
scribed above or modification to the lamp is not
permitted and may lead to damage to people or
property. Moreover, there is the risk of injury or loss
of life and that the lamp may develop technical
faults such as short circuit or fire or give an electric
shock. This lamp is intended for use only in a do-
mestic environment.
Q
Included items
Check that all the items and accessories are pre-
sent and that the lamp is in perfect condition
immediately after unpacking.
1 Energy-saving desk lamp,
Model 7594-010L/-012L/-014L
1 Energy-saving bulb, E14, 9 W
1 Operating instructions
Q Description of parts
1 Spot
2 Flexible hose
3 Mains lead with mains plug
4 In-line switch (ON/OFF)
5 Storage compartments (e.g. for pens etc.)
6 Energy-saving bulb, E14, 9 W
Q
Technical information
Operational voltage: 220 – 240 V, 50 Hz
Bulb: 220 – 240 V, 9 W, E14
Maximum nominal output: 1 x 9 W
Protection category:
Model:
7594-010L: Blue
7594-012L: Red
7594-014L: Titanium
Q
Safety
Safety advice
The right to claim under the guarantee shall be ren-
dered invalid in respect of damage caused by the
non-observance of these operating instructions! No
liability is accepted for consequent damage! No
liability is accepted for damage to property or
persons caused by improper handling or non-
observance of the safety advice!
To avoid danger to life
from electric shock
J Every time before connecting the lamp the
mains, check it and the mains lead for dam-
age. Never use your light if you find it is dam-
aged in any way.
m CaUTIon! A damaged mains lead presents
a serious danger to life from electric shock. In
the event of damage, repairs or other problems
with the lamp please contact the service centre
or an electrician.
Introduction / Safety