Livarno Z31303A-BS Z31303B-BS - Manual (Page 8)

8 GB/IE/CY
Bringing into use / Maintenance and Cleaning / Disposal
j CAUTION! RISK OF
SHEARING OR
CRUSHING INJURY!
A large force is required to attach
the lamp. This could result in a risk
of shearing or crushing injury through
trapping parts of your body.
j Connect the mains connector 5 to
the mains adapter 6 .
j Insert the mains adapter 6 into an
ordinary domestic mains outlet
socket (230-240 V ~).
j Use the ON / OFF switch 3 to
switch the lamp on or off.
j Bend the flexible lamp arm 1 to
bring the lamp into the desired po-
sition.
Note: Do not turn the flexible
lamp arm 1 completely about
itself or the mains lead inside the
lamp could be damaged.
Q
Maintenance and
Cleaning
Note: The device requires no mainte-
nance. The LEDs cannot be replaced.
J Do not use any solvents, petrol or
similar. This would cause damage
to the light.
j Pull the mains adapter 6 out of
the mains socket.
CAUTION! DANGER OF ELEC-
TRIC SHOCK! For electrical safety
reasons do not clean the lamp with
water or other liquids and never
immerse it in water.
j Always use a dry fluff-free cloth for
cleaning the device.
j Never direct the LED light beam on
to reflective surfaces or at people
or animals. Failure to observe this
advice may result in eye injury
and / or loss of sight to people or
animals. Even a weak LED light
beam can cause eye damage.
Q
Disposal
The packaging is made en-
tirely of recyclable materials,
which you may dispose of at
local recycling facilities.
To help protect the environ-
ment, please dispose of the
product properly when it has
reached the end of its useful
life and not in the household
waste. Information on collec-
tion points and their opening
77618A_B GB_IE_CY.indd 8 8/8/2012 5:44:19 PM