Silvercrest Energy Monitor - Manual (Page 11)

13 GB
Safety Instructions
electric shock. Children often underestimate dangers.
Always keep children away from the product.
J 
CAUTIOn! DAngEr OF EXPLOSIOn!
Never operate the wattmeter where there is
any risk of explosion, i.e. close to inflammable
liquids or gases.
J 
Never exceed the stated maximum input voltage.
J 
Avoid strong vibrations or shocks.
J 
Never expose the wattmeter to extreme temperatures,
extreme sunlight, humidity or moisture.
J 
Never expose the wattmeter to extreme temperature
fluctuations. Do not use the wattmeter until it has become
adjusted to the ambient temperature.
J 
Never operate the wattmeter close to strong magnetic
fields such as motors, transformers or similar.
J 
Do not place the wattmeter face down on workbenches
or working surfaces. This helps to prevent damage to the
operating elements and the LCD 1 .
J 
Remove the batteries from the wattmeter if you do not
intend to use if for any length of time.
J 
Do not connect after each other.
J 
Use the power cost meter only in buildings equipped under
Installation Category II (CAT II) according to IEC 664.
The maximum peak voltage must not exceed 2500 V ~.
56861_Energiekostenmessgeraet_Content_GB-PL-CZ-SK.indd 13 26.11.10 10:12