Silvercrest Energy Monitor - Manual (Page 26)

28 GB
Operation
Q  Time measurement function
note: this mode displays the amount of time in hours /
minutes / seconds or hours / minutes format during which all
connected electrical devices consumed energy. The power
cost meter and the devices you wish to monitor must all be
switched on for time measurement.
note: Check that standard displays (see “Measuring the
current“ and “Measuring the mains voltage“) appear in the
top and middle thirds of the LC display 1 .
j 
Press the “PRICE” button 3 repeatedly until the time
symbol 12 and the total symbol 16 appear in the
bottom third of the LC display 1 .
j 
The LCD 1 now indicates the amount of time in which
connected electrical appliances consumed energy.
note: as soon as the counter reaches 99:59:59, the
display switches to hours/minutes format. The maximum
time is 9999:59.
note: you can also call up the total time when the
wattmeter has been removed from the outlet or when
the electrical appliance you are testing is no longer
connected to the wattmeter.
56861_Energiekostenmessgeraet_Content_GB-PL-CZ-SK.indd 28 26.11.10 10:12