Silvercrest SEAD 1800 A1 - Manual (Page 10)

8 SEAD 1800 A1
GB
NOTICE
On the fi rst use the generation of a slight smell may occur, this is due ►
to residues from the production. It is completely harmless and disperses
after a short time. Provide for suffi cient ventilation, for example, open a
window.
Using the appliance
Switching the appliance on and off
Using the control dial “Temperature” 1) 9, set the desired temperature. You
can set the temperature in 1°C steps. A signal tone sounds for every 5°C.
The set temperature appears in the display indicator “Set Temperature” 7.
Using the control dial “Minutes” 2) 3 set the desired cooking time in minutes.
You can set the time in 1 minute steps. A signal tone sounds for every
5 minutes. The set time appears in the display indicator “Minutes” 5.
Press the START/STOP 3) 9 heating button. The heating begins. The heating
progress in indicated through the continous beam “ ”. The momentary
heating temperature is shown in the display indicator “ Current Temperature“
6. Once the heating up is complete, signal tones sound, “
” appears in
the display and the time set in the display indicator “Minutes” 5 begins to
count down.
NOTICE
The backlight of the display switches itself off automatically about 5 minutes ►
after the last activation of a control knob. The display switches itself back
on upon the activation of a control knob.
As soon as the set time period has expired, signal tones sound. The appliance
switches itself off . „
“ and „ “ extinguish in the display.
NOTICE
To stop a heating process or a boiling process, press the heating START/ ►
STOP 9 button.
When the appliance is not in use, ALWAYS remove the plug from the mains 4)
power socket.