Interrupting printing, From the printer – Epson WorkForce AL-MX300DN User Manual
Page 74
Interrupting Printing
From the printer
If the printer is shared, it is possible to interrupt the current print job to print a different print job.
Follow the steps below to use this function.
1. Press the Status button . The Status Check screen appears.
2. Select Print Job Check, and then press the OK button.
Note:
Press the F3 button to pause the current print job. If you want to resume the print job, press the F3
button again.
3. Select the print job that you want to print using the u or d button, and press the OK button.
4. Press the F2 button, and then press the F3 button. The printer starts printing the selected print
job.
Note:
The operation is canceled and printer restarts one minute after the printer is not operated.
AL-MX300 Series User's Guide
Printing 74