Edelbrock 25-9494 User Manual

Edelbrock For the car

Advertising
background image

©2007 Edelbrock Corporation

Rev. 4/07 - DA/mc

EDELBROCK VICTOR SERIES DRAG RACE HEADERS

Catalog #6551

KIT CONTENTS

Edelbrock Corporation, 2700 California Street, Torrance, CA 90503

Toll-Free Tech Line: 1-800-416-8628

Office: 310-781-2222

Tech E-Mail: [email protected]

Note: Your Edelbrock Victor Series Race Headers include stainless steel evacuation tubes, O2 sensor bungs and collector
mounting tabs to be installed, if needed. Collector mounting tabs should be installed after primary tube tuning has been
completed. Evacuation tubes can be positioned on the collector where desired for best fit and hose routing. See the above
diagram for recommended installation.

As the exhaust flow passes by the
tube, it creates a low pressure
area on the backside, which
translate into vacuum.

EXHAUST FLOW

Qty.

Part #

Description

❑ 1

25-9492

Left Side Header

❑ 1

25-9493

Right Side Header

❑ 2

25-9494

Slip-on Merge Collector

❑ 16

36-0710

3/8” - 16 x 1” Header Bolts (Header Flange)

❑ 2

52-9711

O2 Sensor Bungs (SS)

❑ 2

54-6550

Header Port Flange Gaskets (Fel-Pro)

❑ 4

60-8541

5/16”-18 Grade C Lock Nuts (Collector)

❑ 4

68-6550

5/16”-18 x 1-1/2” Grade 8 Hex Bolt (Collector)

❑ 2

79-9719

Evacuation Tubes (SS)

❑ 8

79-9720

Collector Mounting Tabs (SS)

❑ 8

82-3600

5/16” AN Washers (Collector)

❑ 16

82-5590

3/8” Split Lock Washers (Header Flange)

Advertising
This manual is related to the following products: