Marshall Electronics V-LCD70-AFHD - Manual (Page 10)

10
Color TempG
Color TempB
Picture Mode
Standard (Contrast, Brightness, Saturation and Tint = 50)
Soft (Contrast = 40, Brightness, Saturation = 45)
User (User Defined settings)
Vivid (Contrast = 60, Brightness = 55, Saturation = 75)
Aspect Ratio
Full Screen (Image is scaled across the entire screen)
4:3 (Image is displayed in a 4:3 aspect ratio)
16:9 (Image is displayed in a 16:9 aspect ratio)
14:9 (Image is displayed in a 14:9 aspect ratio)
Zoom1 (Scale 45% of the image across the entire screen)
Zoom2 (Scale 50% of the image across the entire screen)
Video & Audio Submenu
Peaking (Superimpose red highlight over parts of the image that are in focus)
Mode1 (red highlight over parts of the image in focus)
Mode2 (red highlight over parts of the monochrome image in focus)
False Colors (Adds visual filtering to determine IRE levels in the image according to the chart below)
Exposure (Adds red-striped overlay to areas of the image that may be overexposed)
Histogram (Display a histogram on the bottom right corner of the display)
Squared Segmentation (OFF = default)
Screen Markers (OFF = Default)
OFF
96%
93%
90%
85%
80%
Center Marker (Places cross-hairs at the center of the display)
Check Field
OFF (Contrast, Brightness, Saturation and Tint = 50)
Mono (Images displayed in monochrome)
Red (Only red colors in image are seen)
Green (Only green colors in image are seen)
Blue (Only blue colors in image are seen)
H/V Delay (Picture is shifted horizontally and vertically to check for ancillary data, HANC and VANC in SDI
signals)
Scan Mode