Marshall Electronics V-LCD70-AFHD - Manual (Page 11)

11
Standard (Normal image display)
Overscan (Displays 95% of the image to avoid showing ancillary data “artifacts”)
Underscan (Displays all available image data, including ancillary data “artifacts”)
Volume (0 – 100 , 50 = Default)
Balance (-10 - +10 , 0 = Default)
Audio Meter (Displays an audio meter with the first two channels of available audio)
Setting Submenu
Image Flip (Flip image display)
V (Flips the entire image vertically)
H (Flip the entire image horizontally)
V/H (Flip the image vertically and horizontally, or 180°)
PIP (Picture in Picture, allowing the display of two images on the screen simultaneously)
PIP Mode
OFF
Small (Small secondary image)
Medium (Medium secondary image)
Large (Large secondary image)
PBP
POP
PIP Source
AV (Composite video input is selected as the second image)
Component (Component video input is selected as the second image)
PIP Position
Upper Left
Upper Right
Lower Left
Lower Right
PIP Swap (Swap position of the main image with the position of the second image)
F1 (Places cross-hairs at the center of the display)
F2
OFF (Contrast, Brightness, Saturation and Tint = 50)
Mono (Images displayed in monochrome)
Red (Only red colors in image are seen)
Green (Only green colors in image are seen)
Blue (Only blue colors in image are seen)
Language (English, Espanol, English = Default)
Reset (Return all settings to the Manufacturer Default settings)