Oki ColorPainter E-64s - Manual (Page 76)

76
Contour Cutting
 Creating a file for cutting
Create an EPS or PDF file that will be used for cutting with an application such as Adobe Illustrator.
Select Spot Color for the color type that will be used for the cut path and enter a name.
This name will be set for the name of the cutter path prefix in the quick set.
 Configuring a quick set
Start RIP-Queue and select Edit Quick Sets.
Select a cutter in Contour Cutter Selection under Cutter Options, and check the Use Cutter Path Prefix box.
Enter the same name as the one you entered for the spot color during cut path creation.
* When this setting has been configured, cut data is sent to CUT-Server the same time print data is sent to the printer.
Configure the other parameters as required.