RISCO Group ACOS - Manual (Page 17)

ACOS Installation Manual
Uncontrolled when printed © RISCO Group 11
After the installation is complete, the InstallShield Wizard Completed dialog box appears. The system
displays a message, “The InstallShield Wizard has successfully installed ACOS. Click Finish to exit the
wizard”
Figure 15: Installation Complete
18. Select the Launch the Program check box to launch ACOS.
19. Click Finish. The ACOS application login screen appears.
Or
20. Click Finish. ACUS is successfully installed.
To verify of ACOS is installed on your machine, perform the following steps:
1. Click Start  All Programs  Risco Axes Plus  ACOS  ACOS. The login screen appears.
2. Enter the login credentials and click Login. Once the ACOS home page appears, ACOS is successfully
installed.
Note: While upgrading ACOS, ensure that you close any instance of any application before upgrading
to the latest version.
2.2 Configuring ACOS
When you install ACOS, the port through which you connect to the RMAC Server has to be changed. You
have to change the port number manually in the configuration file.
To change the port number: