3repairing or removing acos – RISCO Group ACOS User Manual
Page 19
Advertising
ACOS Installation Manual
Uncontrolled when printed
© RISCO Group
13
3
Repairing or Removing ACOS
You can repair or remove ACOS in case there were any defects during installation. To repair ACOS, perform
the following steps:
1. Go to Start
→ All Programs → Risco Axes Plus → ACOS → Repair/Remove ACOS. ACOS
InstallShield Wizard dialog box appears.
Figure 16: Repair/Remove ACOS
2. Click Next. The Program Maintenance dialog box appears.
Advertising