Stop – Remote Processing CAMBASIC User Manual
Page 156
Advertising
Comm ands - 123
STOP
Statement
SYNTAX:
STOP
PURPOSE:
To ter minate pr ogram execution an d retur n to comm and level.
REMARK S:
STOP statements m ay be used a nywher e in a prog ram to term inate executio n. W hen a ST OP is
encountered, the following message is displayed:
< STOP> < Ln nnn>
where nnn is the line number wher e the STOP occur red.
CAM BASIC always returns to com mand level after a STOP is executed. Execution is resumed by
issuing a CONT com mand (see “C ONT Comm and”).
SOUND and multitasking are turned off when STOP is executed. A C ONT m ay cause unexpected
program operation.
RELATED:
C O N T
EXAMPLE:
10 INPUT A,B,C
20 K = 5 : L = 3/2
30 STOP
40 M = CSK + 100 : PRINT M
RUN
? 1,2,3
<STOP> <Ln 30>
ERROR:
none
Advertising