Remote Processing CAMBASIC - Manual (Page 177)

CON FIG C ommands - 4
CONFIG BREAK
Statement
SYNTAX: CONF IG BREAK com port,m ode
PURPOSE: To enab le or disable response to a break charac ter on a co mmu nications por t.
REMARK S: In normal operation an < ESC> to COM1 while the program is running will stop program
execution. The same is true for
$ C in an IN PUT statement.
This response is disabled with CONFIG BREAK.
The com port parameter is 1 or 2.
The mode parameter tells the system whether or not to suppress break. A “ 0” will allow normal
break oper ation. A “1” will suppress the bre ak character s.
RELATED: none
EXAMPLE: 10 CONFIG BREAK 1,1
Suppress break on channel 1.
ERROR: < Data negative > – for com port and m ode