RIGOL DG1000Z Series - Manual (Page 204)

RIGOL Chapter 2 Command System
2-192 DG1000Z Programming Guide
:SYSTem:COMMunicate:LAN:DNS
Syntax :SYSTem:COMMunicate:LAN:DNS <address>
:SYSTem:COMMunicate:LAN:DNS?
Description Set the DNS (Domain Name Service) address.
Query the DNS address.
Parameter Name Type Range Default
<address> ASCII string Refer to the “Explanation” None
Explanation  This command is only valid when the ManualIP configuration mode is turned on
( :SYSTem:COMMunicate:LAN:STATic[:STATe] ).
 The format of <address> is nnn.nnn.nnn.nnn; wherein, the first nnn ranges
from 1 to 223 (except 127) and the other three nnn range from 0 to 255. It is
recommended that users acquire an available DNS address from their network
administrator.
 After sending this command, the new settings will only take effect when
the :SYSTem:COMMunicate:LAN:APPLy command is executed to apply the
current network parameters.
Return Format The query returns a string, for example, 202.106.46.151.
Example :SYST:COMM:LAN:DNS 202.106.46.151 /*Set the DNS address to
202.106.46.151*/
:SYST:COMM:LAN:DNS? /*Query the DNS address and the query
returns 202.106.46.151*/
Related
Commands
:SYSTem:COMMunicate:LAN:APPLy
:SYSTem:COMMunicate:LAN:STATic[:STATe]
:SYSTem:COMMunicate:LAN:DOMain
Syntax :SYSTem:COMMunicate:LAN:DOMain <name>
:SYSTem:COMMunicate:LAN:DOMain?
Description Set the domain name.
Query the domain name.
Parameter Name Type Range Default
<name> ASCII string Refer to the “Explanation” YYYRigolLan
Explanation <name> is the specified domain name and cannot exceeds 99 characters (can
include English characters and numbers).
Return Format The query returns a string.
Example :SYST:COMM:LAN:DOM RIGOL /*Set the domain name to RIGOL*/
:SYST:COMM:LAN:DOM? /*Query the domain name and the query
returns RIGOL*/