Rose Electronics UltraMatrix AV HDMI - Manual (Page 13)

9 ULTRAMATRIX AV HD INSTALLATION AND OPERATIONS MANUAL
Router Type: Select “Matrix DVI 16x16”
Inputs/Outputs: Enter the number of Inputs/Outputs for your UltraMatrix AV HD (16x16).
Com Port: Select the appropriate COM port that your computer is using to access the router.
Router Time out: By default this is 0.2, meaning the computer acknowledges commands almost instantly.
After you have entered the necessary information, click OK. This will now take you to the Main Routing
Window where you can route the different HDMI connections.
Figure 8. Main Routing Window
On this screen you will notice the input buttons running down the left side while the output buttons run across
the top. They are labeled 1 through 16.
The Main Routing Window enables you to control the router’s connections by means of the crosspoint panel,
the buttons, or with pre-recorded routing instructions called macros.