Subaru Robin PKX201 - Manual (Page 12)

PTG109 Service
- 12 -
31. Using two thumbs, press the seal into the cavity
making sure that the rubber grommet does not bind.
The seal should be even and level.
32. Turn the impeller on the crankshaft in a clockwise
position until hand tight.
29. The side of the rotating seal that has the colored
warning mark on it must be facing towards the impeller
and not facing towards the other seal face.
30. To help installation of the seal and rubber grommet
that holds it in the impeller, it might become necessary
to place a little liquid dish washing soap and water
around the seal to help slip it into the cavity of the
impeller.