Eureka 4750A - Manual (Page 10)

10
ENGLISH
How To Assemble
(CONTINUED)
Step 4: (FIG. 4) Secure the hose assembly
●
D to the hose connection on
the rear housing
●
I with 2 short screws
●
K1 .
FIG. 4
FIG. 5
FIG. 6
●
J
●
I
●
K1
●
K1
●
K1
(CONTINUED)
FIG. 6a
Step 5: (FIG. 5) Thread the hose inside the lower hose retainer
●
J and
then attach the lower hose retainer to the rear housing with a short
screw
●
K1 .
Step 6: (FIG. 6) Pull the electrical cord up to the cord retainer and firmly
push into the retainer (FIG. 6a). This will keep the cord out of the way for
next use. Wrap the cord around the carrying handle on the tool caddy and
then wrap around the cord release hook. Secure the plug to the power cord
with the notch in the plug to prevent unwinding.